TRIDO's Combo Unit combines chemical injection and compressed air to allow your well site to go to completely emissions free operation at a low cost. Well suited for well sites with low surface pressures. The Combo Unit offers a variety of configurations with different head sizes to accommodate all your injection and air requirements.
This TRIDO Combo Unit can operate up to 4 chemical injection pumps out of one side and compress air from a 3.5" compressor head out the other side. The Combo unit can make 250 SCFD at 30psi.
Highlights
- Most cost-efficient configuration for low pressure well sites where chemical injection is required.
- Replaces fuel gas, propane, or bottle gas to drive pneumatic instruments.
- Independent air supply = enables fast well restart.
- Multiple injection head attachment supports multiple injection points and adjustable stroke length allows variable injection rates for each injection line.
- Can be controlled remotely using SCADA with Modbus connections.
- Instrumentation air: production to 250 SCFD at 35 psi.
- Injection rates 0-40 GPD per head
Additional components & Install
- Combo Unit is typically configured with a Tank, pressure relief valve, PSV Valves, gauges, Fluid Heads, compressor head, and other possible peripherals. All technical spec sheets are attached or available upon request.
- Can be mounted directly to the floor or to wall using custom brackets. Pump should be mounted in a location that is physically lower that the tank supplying.
Specifications
Injection
Volume | 0-40 GPD 0-152 L/Day |
Max Pressure | 9000 psi 62053 kPa |
Head Sizes | 3/16”, ¼”, 3/8”, ½”, Custom |
Configurations | 1-2 heads |
Compressed Air
Volume | 0-250 SCFD |
Max Pressure | 60 psi 414 kPa |
Head Size | 3.5” |
Motor Type: TRIDO PMAC 24V 3 Phase, C1D1
Power: 75W, 3A RTA peak power draw.
Controller Type: TRIDO MiniMizer VFD 24V, MODBUS, 2 extra Dry Contacts.
Operating Modes: Variable, Pressure, Temperature, MODBUS/SCADA.
For further information on our comprehensive range of products and services please get in touch with us by visiting our contact page.